Pločevinasta strešna kritina MEBI je dobavljiva od slemena do žleba v enem kosu.
Vse naše kritine so odporne na točo.
Izdelana so iz vroče cinkane jeklene pločevine v različnih opečnih ali trapeznih oblikah z protikondenčno izolacijo ali brez. Naša strešna kritina je primerna za vse vrste ostrešij tako nova kot stara, saj ima le 5-5,5kg/m2 ter je izredno lahka, estetska, trajna in ugodna, ter odporna na vse vremenske razmere .
Vse oblike strešnih kritin vam lahko dobavimo z nanosom protkondenčnega filca
ter vam jo lahko dobavimo v 3 dneh ali po dogovoru v več barvnih tonih. Kakovost strešne kritine vam jamčimo tudi s certifikatom kakovosti, saj naročamo le prvovrstne pločevine, z debelim nanosom cinka, kar poskrbi za dolgo življenjsko dobo ter zadovoljne stranke.V nobenem primeru pa se kritina ne sme rezati z rezalko – fleksom.
Vse naše kritine so narejene po Evropskem standardu
SIST EN 14783:2013 in SIST EN 14782:2006
Normal roofing is a brick shaped, with width of 1,15 m. It neto covers 1,085 m in width. Normal roofing beautiful looks is suitable for both residential and commercial premises. It is suitable for flat roofing, as well as for steep roofing. It is produced in variety of colors and materials. Roofing is produced in many lengths from 0,7 m up to 10.15 m. Due to its attractive appearance it is suitable for covering the residential and other buildings with a slope greater than 10%. Normal roofing you is optionally supplied with countercondensing protective felt.
Roofing Klasik - beautiful in shape, width of 1.22 m. In neto it covers 1.14 m in width /panel. Due to its beautiful looks it is suitable for both residential and commercial premises. It is also suitable for flat roofing, as well as for steep roofing. It is produced in variety of colors and materials. Roofing is produced in total lengths from 0,7 m up to 10.15 m. Due to the attractive appearance it is suitable for covering all the residential and other buildings with a slope greater than 10%. Roofing Klasik is optionally supplied with countercondensing protective felt.
Oblika kritine Adria najbolj spominja na primorski korec, zato je posebej primerna za ta del Slovenije. Od naših opečnih oblik ima najvišji valj, ter je izredno močna. Primerna je za naklone nad 8 stopinj. Pokrivna širina oblike Adria je 1000mm, dolžina se dela po naročilu. Po želji se kritina lahko dobavi z nanosom protikondeznega Filca.
Oblika kritine Bond je oblika zelo modernega videza ter nudi odlično zaščito objekta pred zunanjimi elementi. Primerna je za pokrivanje novogradenj ali že obstoječih objektov. Pokrivna širina oblike BOND 1150mm, dolžine te kritine se dela po naročilu, priporočeno do 6m.
Obliko Bond vam lahko dobavimo tudi z protikondenzno zaščito - Filcem
Trapeze sheet TR-10, with a 10 mm height of the rib and covering width of 1100 mm is an excellent choice for covering various types of buildings, especially smaller industrial, agricultural and residential buildings. Trapeze sheet TR-10 is very durable and provides an appropriate aesthetic appearance, irrespective of the type of the object on which you are using it on. It is also used in the sandwich construction of the lower (inner) layer sandwich. Trapeze sheet TR-10 is a flexible solution, as it can be installed on various kinds of sub-structures, such as concrete, steel, wood, etc. It is also possible to use it on the arc curved roofs or walls. It is fixed with special screws with neoprene pad and rider in the upper area of the profile roofing. We recommend that you use professional installation.
Trapeze sheet TR-20, with a 20 mm height of the rib and cover width of 1100 mm is an excellent choice for covering, cladding various types of buildings, especially smaller industrial, agricultural and residential buildings. Trapeze sheet TR-20 is very durable and provides an appropriate aesthetic appearance, irrespective of the type of the building on which it is being used. It is also used in the sandwich construction of the lower ( inner) layer sandwich. Trapeze sheet TR-20 is a flexible solution, as it can be installed on various kinds of sub-structures, such as concrete, steel, wood, etc. It is also possible to use it in the arc curved roofs or walls. It is fixed with special screws with neoprene pad and rider in the upper area of the profile roofing. We recommend professional installation.
Trapezoidal sheet TR-40, whose main feature is extraordinary durability when heavy loaded, is available in a standard trapezoidal design with additional reinforcements in the lower area of sheet metal that create a better aesthetic effect on the roof and further strengthen entire area. Covering width trapeze sheet TR-40 is 1000 mm, the height of the rib is 40 mm, which gives the plate a wide range of applicability. trapeze sheet TR-40 is basically produced from a powder-painted galvanized sheet metal of different thicknesses. On request we also produce it from Al-sheet, galvanized and stainless steel. Trapeze sheet TR-40 is a flexible solution, so it can be installed on various kinds of sub-structures, such as concrete, steel, wood, etc. It is also possible to use it in the arc curved roofs or walls. It is fixed with special screws with neoprene pad and rider in the upper area of the profile roofing. We recommend professional installation.
Corrugated roofing form is particularly suitable for the replacement of Eternit. The width of the cover is 1000 mm, the lengths are optional. For this type of roofing we have to install battens in an interval of 1 m. Corrugated roofing is available with an application of countercondensing felt. Corrugated roofingis distinguished by particularly good appearance, good price and easy way of installation.
STREŠNE KRITINE MEBI
Oglejte si naš novi katalog strešnih kritin in krovsko kleparskih izdelkov preko spodnjega gumba